FAQ

Have a question? Check out our FAQ page and see if we answered it.

Return to Support

How do I find the string and cable lengths for my Hoyt bow?

 #tuning #strings #compound

The string and cable lengths are normally listed on the limb of your bow. If this sticker is missing or illegible, you can go to Hoyt.com and research the existing tune charts for the correct specifications. Please visit the Compound Bow Tune Charts page.

How far can I back my limb bolts out and how many pounds of draw weight do I lose with each turn?

 #tuning #compound #draw weight

The maximum recommended amount of limb bolt turns is 8. The amount of weight that you will lose depends on the bow. Each bow model is different and one revolution on a 70 lbs. bow can equate to as much as 3 lbs. of weight reduction while one full turn on a 60 lbs. bow may equate to a 2.5 lbs. reduction in draw weight.

Where do I find an Owner’s Manual for my Hoyt Bow?

 #manuals #compound #recurve

Owner’s manuals from 2002-present are available on our Manuals page.

How do I know which arrow to use with my compound bow?

 #tuning #compound #arrows

The Easton Shaft Selector is a great tool and can be found at: http://www.eastonarchery.com/download/software

How can I learn more about tuning and maintaining my Hoyt bow?

 #tuning #maintenance #compound #recurve

The Hoyt Owner's Manual is full of helpful tips on basic tuning and maintenance! The manuals (by product year) can be found at http://www.hoyt.com/customer_service/hoyt_bow_manuals.php . In addition to the owner's manual, many helpful tuning tips can be found in the Easton Arrow Guide. You can download the guide at: http://www.eastonarchery.com/download/software

Will the RKT cam fit on my 2011 or older model bow?

 #tuning #compound #cams

The RKT cam is a completely new cam and requires different string lenghts and limb deflections. In addition, the geometry of the bow is different so the draw lengths will change as well. Therefore, you will not be able to replace your current cams with the RKT cam.

What is the proper way to adjust recurve riser alignment?

 #tuning #recurve

For detailed instructions on proper recurve riser alignment adjustment, download the "riser adjustment procedure" PDF.

How far can I back the weight off of my compound bow and still be safe?

 #tuning #compound #draw weight

Hoyt recommends that you never exceed eight complete rotations of the limb weight adjustment bolts from the bottomed out (maximum weight) position.

What size arrow should I shoot with my bow?

 #tuning #compound #recurve #arrows

To find out which arrow is the best to shoot with your setup, visit www.eastonarchery.com and click on the Shaft Selector Guide. This will walk you through a simple step by step process in order to find the shaft that's best for you. Bows should not be shot with arrows weighing less than 5 grains per pound.

How do I adjust the draw weight of my bow?

 #tuning #compound #draw weight

Weight adjustments can easily be made by turning the weight adjustment bolt clockwise to increase weight or counter clockwise to decrease weight. You should always turn the top and bottom adjustment bolts in equal amounts. Be sure to unstring recurve bows before making adjustments.

How often should I replace my strings and cables?

 #compound #maintenance #strings

Hoyt recommends that a bow's strings and cables should be changed when wear is evident or every two years under normal use conditions.

How often should I wax my bow strings?

 #compound #maintenance #strings

Hoyt recommends applying a light coat of bowstring wax to your bow's strings and cables on a regular basis. Hoyt suggests once every two weeks during peak use. Use a high quality bowstring wax available at your local Hoyt Pro Shop.

How often should I lubricate my wheels/cams?

 #compound #maintenance #cams

A light, spot lubrication of the axles where they pass through the wheel/cam should be done on a regular basis (1,500-2,000 shots). In adverse hunting conditions where dirt, dust, and moisture are encountered, lubrication may be done on a daily basis. Hoyt recommends that you use a silicone or Teflon based lubrication or any other quality grease available at your local Hoyt Pro Shop. It is not recommended that you use "penetrating oils" such as WD-40, EZ #7, Fast Break, etc. Note: Cam & 1/2 System bows feature sealed stainless steel ball bearings which do not require lubrication.

I have made alignment adjustments to my Hardlock dowel equipped Hoyt recurve riser but now I want to return the bow to the factory zero setting. How do I do it?

 #tuning #recurve

It is a simple matter to return your Hoyt recurve Hardlock dowel to the factory zero position. The installation of two alignment washers on the solid end of the dowel (the opposite end of the dowel from the screw and cap), and insertion of the dowel from the sight window side (top and bottom are not interchangeable) sets the dowel back to zero. Place unused washers under the cap, replace the locking screw, tighten the system down, and you a have a factory-fresh setting- which is all you need in 99.9 percent of setups with Hoyt limbs. Full details can be found in a PDF download in the recurve section of this FAQ under the topic "how do I align my recurve riser".

What is the proper way to adjust recurve riser alignment?

 #tuning #recurve

For detailed instructions on how to properly adjust recurve riser alignment, download the PDF titled 'riser adjustment procedure'.

What recurve string material does Hoyt recommend ?

 #recurve #tuning #strings

All Hoyt recurves are engineered to work with the latest high-performance string materials. We have extensively tested and have had good results with the following: Angel Majesty Brownell D75 Dyneema Brownell D75 Thin Brownell TS1 BCY Dynaflight 97 BCY 8125G Any of these current materials can be used to build an excellent recurve bowstring. Please consult manufacturer websites for additional information on these string materials.

How many twists can I have/or do I need in my recurve bow string?

 #recurve #tuning #strings

Hoyt recommends that a modern synthetic (Dyneema, Fast Flight, etc.) string for a high-performance bow have not less than 15-20 twists with a suggested maximum of 1 twist per inch of string length. This promotes a rounder, more consistent string.

When my recurve limbs are unstrung, I can easily move them back and forth. Do I have a problem ?

 #recurve #limbs

» The original, patented Hoyt Dovetail system functions by self-centering the limb on the engagement surfaces of the limb itself. This means that the system will appear to be loose until the bow is strung. Once the bow is strung, the self-centering aspect of the system takes over. Every time the bow is shot, the limbs are forced to the precise center alignment dictated by the geometric position of the alignment dowels. This makes shimming limbs for pocket fit unnecessary. Note that other bow companies making an imitation Hoyt dovetail may not hold the neccessary tolerances required for optimal system function.

How does Hoyt decide who is on the Hunting Pro Staff?

 #pro staff

Hoyt has some of the most decorated names in the hunting industry on its Hunting Pro Staff. These professional hunters are among the most hardcore, avid bowhunters you’ll find anywhere. Many of them hunt for a living or have their own TV shows. They travel the world in search of trophy-class and hard-to-find game. Many record book-class trophies fall each year to the stealth of the Hoyt Bowhunting Pro Staff. Here are some of the requirements to earn a spot on Hoyt’s Bowhunting Pro Staff (In no particular order): · Be a diehard Hoyt fan. · Be an ethical and responsible hunter. · Be a regularly published writer in the major bowhunting publications. · Have your own television program that is aired on the Outdoor Channel (or be actively involved in one). · Regularly produce quality bowhunting videos and DVD’s. · Hunt a lot! · Be actively involved in promoting the sport of bowhunting.

How does Hoyt decide who is on the Pro Shooting Staff?

 #pro staff

Hoyt has a factory direct professional shooting staff. This staff is compiled of the finest archers from across the globe. Many of whom have won or hold many world records, national records, world championship and national championship titles. These shooters are the cream of the crop and the best of the best. Here are some of the requirements that they have accomplished to get them on the Hoyt Pro Staff. (In no particular order): · They actively compete in the highest level of competition or the professional divisions at one of the following tournament circuits: NFAA, NAA, IBO, ASA and FITA. · They commit each year to at least one pro tour circuit in the NFAA, NAA, IBO, ASA and/or FITA tournaments. · They consistently medal at the above mentioned tournaments. · They are very helpful to newcomers to the sport and are actively involved in promoting the sport of archery. · They are professional and sportsmanlike in all archery related functions. · They are likely on a national archery team. · They have a diehard passion for Hoyt and are loyal to the Hoyt brand. If you feel that you meet the requirements to join our staff, please submit a resume to [email protected]! How does Hoyt decide who is on the National Shooting Staff? The National Shooting Staff is administered and managed by participating, authorized Hoyt dealers. For more information please contact your local authorized Hoyt dealer.

How do I find the serial number on my bow?

 #support

The following section of Hoyt.com will show you the possible serial number locations on your Hoyt bow: Hoyt Serial Number Information

How do I go about requesting a donation from Hoyt?

 #general

All donation requests must be submitted in writing to: Hoyt Donation Request 593 North Wright Brothers Drive Salt Lake City Utah, 84116 *Please include an email address with your donation request.

Where can I purchase or get pricing for Hoyt product?

 #general #pricing

Visit a Hoyt authorized dealer. To find the closest dealer to you, simply click on "Where To Buy" link at the top of each page, and select your country/region. All authorized Hoyt dealers within 100 miles of you will be shown.

If my bow needs repairs or warranty work what should I do?

 #support #general

Visit either the dealer where the bow was purchased from or any other authorized Hoyt dealer. To find the dealer nearest you, simply click on the "Where To Buy" link at the top of each page, and select your country/region. All authorized Hoyt dealers within 100 miles of you will be displayed. All bows sent to the Hoyt factory must be handled through an authorized Hoyt dealer.


Your Shopping Cart

Your cart contains the following items. Feel free to checkout now, edit your cart or continue shopping.

×